@Copyright 2024 WhatCarOil.com
Check Oil Type, Grade And Viscosity For Jeep Wrangler
To maintain optimal performance and prevent unnecessary fuel consumption caused by engine compartment deposits, it is crucial to regularly replace the engine oil and oil filter in your Wrangler. In this comprehensive article, we have gathered the recommended oil change intervals for the Wrangler I, II, and III (construction codes YJ, SJ, TJ, JK), along with the corresponding oil quantities required for each engine variant.
The intervals for oil changes in the Wrangler vary according to the year of manufacture and the engine type, as defined by Jeep. For instance, third-generation 2.8-liter diesel SUVs require fresh engine oil every 15,000 miles or 12 months, whereas older Wrangler IIs equipped with 2.4-liter engines necessitate an oil change every 12,000 miles or annually.
It also depends on the engine equipment how many liters of oil are needed for the service and which types of oil are used in each case. For a Wrangler III 2.8 CRD, for example, a good 6.6 liters of lubricant of the viscosity classes 0W40 or 5W30 are refilled per oil change. More information on oil quantities, oil types with manufacturer approval and viscosity classes can be found in the tables below.
When you're pulling a caravan, changing the engine oil in your Jeep Wrangler becomes even more crucial. Your engine has to work harder and produce more heat when you're towing. Engine oil fills a critical role in lubricating moving components and lowering friction in this situation. Additionally, the engine works harder and generates more heat when you're towing. Your engine may be damaged if the oil were to degrade and lose its efficiency over time.
Maintaining the best lubrication and cooling capabilities, particularly while towing, requires routine engine oil changes. Your engine is kept safe and operating at its best thanks to it. Additionally, towing entails lengthy journeys during which the engine runs continuously, adding additional strain.
We have listed all the Jeep Wrangler models and engine types in the following table, as well as the correct engine oil grade for each of the cars. You can use the search and filter to easily find the right engine oil for your Jeep Wrangler.
| Car Make & Model | Year | Oil Grade |
|---|---|---|
| Jeep Wrangler 2.0 JL | 2017, 2018, 2019 | 5W-30 |
| Jeep Wrangler 2.0 JL | 2020, 2021, 2022 | 5W-30 |
| Jeep Wrangler 2.0 JL | 2023 | 5W-30 |
| Jeep Wrangler 3.6 JL | 2017, 2018, 2019 | 0W-20 |
| Jeep Wrangler 3.6 JL | 2020, 2021, 2022 | 0W-20 |
| Jeep Wrangler 3.6 JL | 2023 | 0W-20 |
| Jeep Wrangler 2.8 CRD DPF | JK 2006-2018 | 5W-30 |
| Jeep Wrangler 2.8 CRD | JK 2006-2018 | 5W-30 |
| Jeep Wrangler 3.6 4x4 | JK 2006-2018 | 5W-20 |
| Jeep Wrangler 2.4 (USA) | 1997-2007 | 5W-30 |
| Jeep Wrangler 2.4 TJ | 1997-2007 | 5W-30 |
| Jeep Wrangler 2.5 (USA) | 1997-2007 | 5W-30 |
| Jeep Wrangler 2.5 TJ | 1997-2007 | 5W-30 |
| Jeep Wrangler 4.0 (USA) | 1997-2007 | 5W-30 |
| Jeep Wrangler 4.0 TJ | 1997-2007 | 5W-30 |
| Jeep Wrangler 2.5 (USA) | 1985-1997 | 5W-30, 10W-40, 5W-40 |
| Jeep Wrangler 2.5 | 1985-1997 | 5W-30 |
| Jeep Wrangler 4.0 (USA) | 1985-1997 | 5W-30 |
| Jeep Wrangler 4 | 1985-1997 | 5W-30 |
| Jeep Wrangler 4.2 (USA) | 1985-1997 | 5W-30, 10W-40, 5W-40 |
| Jeep Wrangler 4.2 | 1985-1997 | 5W-30, 10W-40, 5W-40 |
| Jeep Rubicon (147 kW/200 hp) | 2018, 2019, 2020, 2021 | 5W-30 |
| Jeep Wrangler 2.4i Soft Top (105 kW/143 hp) | 2002 - 2007 | 5W-30 |
| Jeep Wrangler Rubicon 2.0T 2doors (200 kW/272 hp) | 2019, 2020, 2021 | 5W-30 |
| Jeep Wrangler Rubicon 2.0T 4doors (200 kW/272 hp) | 2019, 2020, 2021 | 5W-30 |
| Jeep Wrangler Rubicon 2.2 2doors (147 kW/200 hp) | 2018, 2019, 2020, 2021 | 5W-30 |
| Jeep Wrangler Rubicon 2.2 4doors (147 kW/200 hp) | 2018, 2019, 2020, 2021 | 5W-30 |
| Jeep Wrangler Rubicon 2.8 CRD (130 kW/177 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Rubicon 2.8 CRD Automatic (130 kW/177 hp) | 2007 - 2018 | 5W-30 |
| Jeep Wrangler Rubicon 3.8 V6 (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Rubicon 3.8 V6 Automatic (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Rubicon PHEV (280 kW/381 hp) | 2021, 2022, 2023 | 5W-30 |
| Jeep Wrangler Rubicon PHEV (fuel) (200 kW/272 hp) | 2021, 2022, 2023 | 5W-30 |
| Jeep Wrangler Sahara 3.8 V6 Automatic (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Sport 2.8 CRD (130 kW/177 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Sport 2.8 CRD Automatic (130 kW/177 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Sport 3.8 V6 (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Rubicon 2.8 CRD (130 kW/177 hp) | 2007 - 2018 | 5W-30 |
| Jeep Wrangler Unlimited Rubicon 2.8 CRD Automatic (130 kW/177 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Rubicon 3.8 V6 (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Rubicon 3.8 V6 Automatic (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Sahara 3.8 V6 Automatic (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Sport 2.8 CRD (130 kW/177 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Sport 2.8 CRD Automatic (130 kW/177 hp) | 2007 - 2017 | 5W-30 |
| Jeep Wrangler Unlimited Sport 3.8 V6 (146 kW/199 hp) | 2007 - 2017 | 5W-30 |
| Jeep Night Eagle (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2022, 2023 | 5W-30 |
| Jeep Overland (4x4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2022, 2023 | 5W-30 |
| Jeep Rubicon (4x4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2022, 2023 | 5W-30 |
| Jeep Rubicon (4X4) 2 Door 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2022, 2023 | 5W-30 |
| Jeep 80TH Anniversary Special Edtn 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Night Eagle (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Overland (4x4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Rubicon (4x4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Rubicon (4X4) Recon Special ED 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Sport S (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Willys (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2021 | 5W-30 |
| Jeep Rubicon (4x4) 2.1L, Diesel, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
| Jeep Night Eagle (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
| Jeep Overland (4x4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
| Jeep Rubicon (4x4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
| Jeep Rubicon (4X4) Recon Special ED 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
| Jeep Sport S (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
| Jeep Willys (4X4) 3.6L, Unleaded Petrol, 8 SPEED AUTOMATIC | 2020 | 5W-30 |
If you're confident in your DIY auto maintenance skills, you have the option to purchase either conventional or synthetic oil in the 5W-20 or 5W-30 grade, along with a replacement oil filter. If you require assistance in finding the recommended oil for your Jeep Wrangler, don't hesitate to seek guidance from our team or order the necessary supplies through our parts center. Once you have all the required materials, follow these step-by-step instructions to conduct an oil change for your Jeep Wrangler in the comfort of your own home:
1) Safely elevate your Wrangler using a car jack or steel ramps, ensuring proper support with jack stands or wheel blocks.
2) Locate the oil drain plug situated underneath the engine and attached to the oil pan.
3) Position an oil basin beneath the plug and carefully unscrew it, allowing the old oil to completely drain. This process may take up to 15 minutes. Once drained, securely replace the plug.
4) Utilize an oil filter wrench to remove the old oil filter. Prior to removal, ensure that the oil basin is positioned to catch any excess oil.
5) To ensure a proper seal, apply a small amount of new motor oil onto the rubber seal of the new filter.
6) Install the new filter and hand-tighten it. Use the oil filter wrench to fully tighten it.
7) Open the hood and locate the oil reservoir. Pour in the recommended amount of oil for your Jeep Wrangler, which can vary depending on the model and engine.
8) Use the dipstick to check the oil level in the reservoir. If the level is low, gradually add oil in measured increments.
9) Continuously re-check the oil level after each addition until it reaches the proper level.
By following these instructions, you'll be able to successfully perform an oil change for your Jeep Wrangler at home.
